|Swelling Capacity (2gm)||30% to 38%|
|pH Value (in 6gm)||9.5% to 11%|
|Moisture||12% to 14.5%|
|Plate water||780% (+/-50)|
|Gelling time||Instant 30 sec|
|Wet tensile strength||38% to 45%|
|M B Value||400% to 440%|
|Powder mesh size (in 200mesh)||75% to 90%|
|Lumps size||0 to 50 mm|
After so many researches and personal attention of our experienced partner MR.N.N.Sanghvi to develop next generation sodium bentonite named “BENTOROCK”. We add two more tonic to improve quality of Bentonite. This quality is mainly for more strength & low consumption of Bentonite in pelletizing. As we all know Sodium Bentonite is very useful in Iron Ore Pelletizing as a Primary Binder. We glad to know that advanced Iron ore pellets plants and casting units demanding this grade.
Almost 40% reduce Bentonite Consumption depend on castings
Very High Green Compression Strength
Reducing Sio2 and Al2O3 it is very good for pelletizing.
Fastest Gelling Time.
Very high wet tensile strength.
High Plate water for IOP
Packing & Storage :
Recommended Applications :- Foundry Casting
Iron ore Pelletisation