-
sanghvi_bento@rediffmail.com -
08069247352 Ext : 918
Sodium Bentonite Lumps
Leading Manufacturers, Exporters and Wholesaler of Special Bond Sodium Bentonite Lumps, Hy Bond Sodium Bentonite Lumps, Max Bond Sodium Bentonite Lumps, Expo Bond Sodium Bentonite Lumps, Bentorock Sodium Bentonite Lumps and Uni Bond Sodium Bentonite Lumps from Kutch.
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
| Swelling Capacity (2gm) | 28% to 34% |
| pH Value (in 6gm) | 9% to 10.5% |
| Moisture | 11% to 13.5% |
| M B Value | 370% to 430% |
| Wet tensile strength | 32% to 37% |
| Powder mesh size ( in 200 mesh) | 75% to 90% |
| Plate water | 680% (+/-50) |
| Gelling Time | Instant 30sec |
Preferred Buyer From
| Location | India, Bangladesh, Malaysia, Sri Lanka, United Arab Emirates |
SPECIAL BOND is high swelling capacity Bentonite available Lumps & Powder. We process highly for desire result in Bentonite. We do wet process for higher result, in process Bentonite takes around 300 ltr water for processing. We use high quality of Chemicals for processing. Processing takes time almost 25 to 30 days.
SPECIAL BOND cover large surface area & strong bonding properties. Special Bond has excellent thermal stability with high water absorption. Special Bond has low specific burnout ratio in moulding sand due to more thermal durability than normal Bentonite. Special Bond is highly recommended in High pressure molding and deep draw casting.
Packing & Storage :
- 50 kg HDPE old/new Bags with machine steaching
- 1 or 1.25 MT. Jambo Bags
- Store in Dry Place
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
| Swelling Capacity (2gm) | 8% to 15% |
| pH Value (in 6gm) | 8.5% to 9.5% |
| Moisture | 11% to 13% |
| Liquid limit | 200% to 250% |
| Montmorillonite | 85% to 95% |
| Powder mesh size ( in 200 mesh) | 80% to 90% |
| Gell index | 30% to 45% |
Preferred Buyer From
| Location | India, Bangladesh, Malaysia, Sri Lanka, United Arab Emirates |
In india we find very superior quality Natural Sodium base Bentonite in Kutch region In Gujarat. We care lot to make very special quality of Bentonite “HY BOND”. At the time of mining we select special Bentonite which has low impurity & good strength. HYBOND is natural sodium bentonite, We are not adding single chemical in it. We try to remove a 99% impurity in Bentonite and ready with specified size.
Packing & Storage :
- 50 kg HDPE old/new Bags with machine steaching
- 1 or 1.25 Jambo Bags
- Store in Dry Place
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
| Swelling Capacity (2gm) | 18% to 24% |
| pH Value (in 6gm) | 8.5% to 9.5% |
| Moisture | 11% to 13% |
| Liquid limit | 420% to 460% |
| Montmorillonite | 90% to 94% |
| Powder mesh size ( in 200 mesh) | 80% to 90% |
| Gell index | 55% to 70% |
| Gelling Time | Immediate |
| Sand Contain | 0.7% to 0.9% |
Preferred Buyer From
| Location | India, Bangladesh, Malaysia, Sri Lanka, United Arab Emirates |
MAX BOND is pure pilling grade sodium based bentonite. It contain high Gell Formation index. Maxbond is use in water pilling where it done high water proofing. It is very low cost water proofing chemical. MAX BOND is highly demand in Metro projects, Bridge projects, Pound or swimming pool projects. We process specially to make this desire quality as per customer require. It is also used in Landfill projects.
Packing & Storage :
- 50 kg HDPE old/new Bags with machine steaching
- 1 or 1.25 MT. Jambo Bags
- Store in Dry Place
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
| Filtrate Volume | 15% to 17% |
| Vosco meter Dial Reading 600 rpm | 30% to 35% |
| Yield Point / Plastic Viscosity Ratio | 3% to 6% |
| Wet Residue Retained 75 micron | 2.5% to 4% |
| Moisture Content | 13% to 14% |
| Swelling capacity | 22% to 28% |
Preferred Buyer From
| Location | India, Bangladesh, Malaysia, Sri Lanka, United Arab Emirates |
EXPOBOND is more suitable for Oil Drilling. EXPOBOND is pure high swelling capacity Bentonite with high viscosity. EXPOBOND offers superior performance as per API / OCMA specification. EXPOBOND has very low filter loss. EXPOBOND has also advanced lubrication ability. We create this grade as per customer specification & Requirement to achieve best performance.
Packing & Storage :
- 50 kg HDPE old/new Bags with machine steaching
- 1 or 1.25 MT. Jambo Bags
- Store in Dry Place
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
| Swelling Capacity (2gm) | 30% to 38% |
| pH Value (in 6gm) | 9.5% to 11% |
| Moisture | 12% to 14.5% |
| Plate water | 780% (+/-50) |
| Gelling time | Instant 30 sec |
| Wet tensile strength | 38% to 45% |
| M B Value | 400% to 440% |
| Powder mesh size (in 200mesh) | 75% to 90% |
| Lumps size | 0 to 50 mm |
Preferred Buyer From
| Location | India, Bangladesh, Malaysia, Sri Lanka, United Arab Emirates |
After so many researches and personal attention of our experienced partner MR.N.N.Sanghvi to develop next generation sodium bentonite named “BENTOROCK”. We add two more tonic to improve quality of Bentonite. This quality is mainly for more strength & low consumption of Bentonite in pelletizing. As we all know Sodium Bentonite is very useful in Iron Ore Pelletizing as a Primary Binder. We glad to know that advanced Iron ore pellets plants and casting units demanding this grade.
Benefits :
-
Highest Strength.
-
Almost 40% reduce Bentonite Consumption depend on castings
-
Very High Green Compression Strength
-
Reducing Sio2 and Al2O3 it is very good for pelletizing.
-
Fastest Gelling Time.
-
Very high wet tensile strength.
-
Good Permeability.
-
High Plate water for IOP
Packing & Storage :
- 50 kg HDPE old/new Bags with machine steaching
- 1 or 1.25 MT. Jambo Bags
- Store in Dry Place
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
| Swelling Capacity (2gm) | 35% to 42% |
| pH Value (in 6gm) | 10% to 11.5% |
| Moisture | 11% to 14% |
| M B Value | 400% to 430% |
| Wet tensile strength | 35% to 40% |
| Powder mesh size ( in 200 mesh) | 75% to 90% |
| Plate water | 700% (+/-50) |
| Gelling Time | Instant 20sec |
Preferred Buyer From
| Location | India, Bangladesh, Malaysia, Sri Lanka, United Arab Emirates |
UNIBOND is very high swelling capacity Bentonite available Lumps & Powder. We process twice for desire result in Bentonite. We do wet process for higher result, in process Bentonite takes around 300 ltr water for processing. We use high quality of Chemicals for processing. Processing takes time almost 30 to 45 days. UNIBOND has strong bonding properties. UNIBOND has excellent thermal stability with high water absorption.
UNIBOND has 35+ swelling capacity which is very rare in kutch Bentonite. And also maintain 400+ MB Value and around 700 Plate water, these two factors are very important in Casting & Pelletisation.
Packing & Storage :
- 50 kg HDPE old/new Bags with machine steaching
- 1 or 1.25 MT.Jambo Bags
- Store in Dry Place
